

Injectose is a Grenoble-based deeptech startup developing a unique injection-molding process adapted to cellulose fibers, protected by two patents. Our mission: replace plastic everywhere we can.
Injectose is hosted at LGP2 (Grenoble INP – Pagora, UGA), an internationally recognized laboratory in bio-based materials and paper science it will give you the agility of a startup with access to the equipment and expertise of a leading research lab.
Ose One, our injection-molded cellulose material, is made from 95 % cellulose fibers shaped in a mold and then dried. It can already replace plastic in parts such as cups, caps and packaging components, and it remains fully recyclable in the paper stream and biodegradable.
To open new applications, Ose One now needs a wider range of properties. Packaging clients ask for parts that are more flexible and less brittle, keep accurate dimensions after drying, and better resist moisture, grease or gases.
You will work on optimizing the formulation to widen these mechanical and barrier properties. You will study fibers, binders and natural additives, and validate them on injected parts. Throughout, the material must stay at 95 % cellulose fibers and keep its recyclability.
Your missions
📐 Drying parameters
Understand the mechanisms during drying
Test the levers: formulation, fiber blends, drying conditions
Work on the parameters of injection process and the mold
🌀 Improve flexibility
Improve the flexibility of injected parts according to customer requirements
Work on the formulation: explore natural plasticizers and fibers, while keeping 100 % recyclability
🏭 Prototype and scale up
Produce injection-molded prototypes made of 90-95 % cellulose fibers
Contribute to the development of our patented process at pilot scale and to industrial trials
Design molds for new applications and run mechanical tests
🔍 Analyze
Develop methods to identify binders and additives in a cellulose part
Characterize: mechanical and barrier properties, density, moisture resistance, aging
Assess end of life: recyclability, compostability, life cycle assessment
Present your results to the team and to our industrial partners
You
Final-year engineering or Master’s student in materials science, physical chemistry or process engineering
Background in polymers and formulation; knowledge of cellulosic and fibrous materials, analytical chemistry (infrared spectroscopy, chromatography) or mechanical testing would be an asset
Interested in innovation, technology transfer and the circular economy
Good level of English and French
Available from for 6 months
Autonomous, critical-minded and proactive, with a strong will to learn and a team spirit
In practice
📍 LGP2, Grenoble INP – Pagora campus, Saint-Martin-d’Hères (Grenoble area)
🗓️ 6 months · start in February 2027